|
| | | About Hunting Knifes
New Hunting Knifes Articles from http://www.knifeworks.com  Hunting Knifes, and Spyderco Knives. One thing that you'll find about us is that we know our stuff. Lets talk about blade grinds and then a certain type of edge design. The hollow grind is the most common grind, found on the majority of custom and production pieces. For a hollow grind, the edge is made by two concave scoops.
Some Edge designs, like the skinner, put the point up and out of the way since the objective of the design is to slice.
Hunting Knifes Our federal government became involved in firearms regulation in the early part of this century and continues to assume an increasing level of control as to firearms. Another option is the combination plain/serrated edge. In martempering the steel is withdrawn from the quench at the same point, and is then placed in a constant-temperature bath until it attains a uniform temperature throughout its cross section. Another type is the folding blad which is the commonly known knife that can be compacted to half its size by folding the blade into the handle. With a locking liner, opening the blade will allow this metal to flex over and butt against the base of the blade inside the handle, locking it open. One difficulty in the manufacture of steel is its high melting point, about 1370 c about 2500 f, which prevents the use of ordinary fuels and furnaces. In carburizing, the piece is heated in charcoal or coke, or in carbonaceous gases such as methane or carbon monoxide. |
Boot Knife | Cold Steel Katana | Hunting Knifes
 |
| | | |
