|
| | | About Spyderco Scorpius
New Spyderco Scorpius Articles from http://www.knifeworks.com  Spyderco Scorpius, and Boot Knife. It is important to practice safety when using a weapon such as this. Being careless often results in injury, and that's the last thing we (or you) want. This might interest you if you're interested in the refining process. The most primitive facility used to refine iron from iron ore is called a bloomery. The modern technique of making wrought iron uses molten iron from a bessemer converter and molten slag, which is usually prepared by melting iron ore, mill scale, and sand in an open-hearth furnace.
Spyderco Scorpius
This doesn't mean there's an obvious answer as to which steel should be used on which knife quite the opposite, there are almost always lots of different steels that will work well for a particular knife. For example, a 12-inch butcher knife would be commonplace and unquestionably legal in a butcher shop or meat packing plant, but might be questionable in the proverbial dark alley at 3:00 am. The steel provides a working edge and the carbon fiber reinforces the steel for strength. If you look at, say, a kabar, you will first see a bevel at starts from the middle of the knife and goes most of the way towards the edge. The problem was that the sharpened edge rusted and most people would rather have a knife that did not hold an edge like the high-speed gerber blades but did not rust. Should you carry a serrated blade or plain blade for everyday utility carry? Wood lock - this lock was designed by barry wood. |
Cold Steel Tanto | Gerber Knives | Spyderco Scorpius
 | | | | |
