Otis Gun Cleaning Kit
About Otis Technology, Inc.
The Otis Technology Breech-to-Muzzle Cleaning System is widely regarded by experts as the most advanced gun cleaning system in the world. It offers many gun cleaning advancements and refinements developed for the military and competitive marksmen and hunters. By cleaning Breech-to-Muzzle, dirt and fouling is pulled out the muzzle, not pushed back into the action gumming the trigger or causing malfunctions. The patented all-caliber patches not only provide up to six passes per patch, but form a perfectly circular cleaning swab. Because the slotted tip with the patch is pulled through the chamber, it doesn't compress the patch against the side of the rod. Conventional rods will jam off-center, scraping the rifling in the process, and potentially ruining the bore. The 750 lb. pull strength of the Otis Memory-Flex rod allows you to tightly form the patch to the bore, actually cleaning it rather than just moving the dirt around. The tight patch is formed by being pulled through the chamber, compressing in the throat, and cleans the leading edge of the rifling; the edge that actually bears the stress of the rotating bullet. For shotguns, custom soft durometer plugs, ("patch savers") force the patch to the full diameter of the bore, cleaning the chamber, forcing cone, bore and choke -- all without having to disassemble the gun!
The principle components of the Otis System are so well built that they have a lifetime warranty! The circular all-caliber patches are made of 100% cotton, and unlike cheap synthetic patches are not dissolved by the bore solvent, turning into plastic gunk left on the rifling. The tight weave of these patches actually pulls metallic copper flake buildup out of the grooves rather than leaving fibers embedded along the bore. The SupraTine brushes are custom made with more and finer bristles than lesser brands. The belt-pack cases are made of ballistic nylon, with heavy-duty zippers. The Bore Obstruction Removers are designed to avoid deforming a stuck bullet and will gently force it out of the bore with multiple taps from the Memory-Flex rod. The Memory-Flex rod is nylon coated aircraft grade cable with compression welded fittings that will support over a quarter ton of pull force!