Smith's Diamond Edge 2000 Electric Knife Sharpener

The Diamond Edge 2-Stage / 2000 Electric Knife Sharpener incorporates both mechanical and manual sharpening elements in one unit. The mechanical sharpening slot features a diamond coated sharpening wheel and blade guides to hold your knife at the correct angle during mechanical sharpening.

After sharpening both sides of your blade with the diamond sharpening wheels. Smith's recommends using the crossed creamic stones in th manual finishing slot for the final edge honing. Ceramic stones remove any burrs left on your blade from mechanical sharpening and put a razor sharp edge on your blade and can be used for a quick touch up of an already sharp blade.
 

There is little maintenance required with your Smith's electric sharpener. To clean the exterior housing, unplug the unit from the electrical outlet and simply wipe with a damp cloth.

• Do not use a powdered abrasive cleaner to clean sharpener
• To protect against risk of electrical shock do not put any part of the appliance in water or other liquid
• Do not use any lubricant or water to clean the abrasive sheel
• Do not use a lubricant on any other component
• Periodically, the clean out door on the bootom of the sharpener should be opened and cleaned. Also try to clear any remaining particles from the collection area inside the housing before replacing the door.

Reversing, Cleaning or Replacement of Ceramic Stones:

The ceramic stones can be reversed or cleaned to refresh their abrasive qualities. The white ceramic darkens with use as the metal fillings collect on the working corners of the triangular blocks. The two stones can be turned on end or rotated to expose an unused section of the ceramic. After all possible working surfaces of the ceramics are well used, the ceramics can be cleaned using a scrub brush and common cleansing kitchen powder.